Aviary SolAxe™ GT Chassis Kit (IP65 Outdoor Enclosure & Thermal Solution)

Take your existing Bitaxe ASIC miner outdoors under solar power. The SolAxe™ GT Outdoor Enclosure & Thermal Kit provides our machined weather-resistant housing and forced-air cooling hardware—ready for you to wire up your own regulator and hashboard.

(Note: This is the Bare Enclosure Kit, which includes the machined housing, cooling fan, gland, and hardware only. It does not include the internal solar MPPT controller, buck regulator, or LED voltmeter. For the pre-wired version, see our $159 Drop-In Solar Chassis).

Sized to accept Bitmain BM1370-based Bitaxe 801, Gamma, and Supra single-board miners, this enclosure uses positive-pressure top intake and 55 bottom/side exhaust ports to keep rain out while moving cool air directly across the heatsink and VRM.

What's Included in the Enclosure Kit - **Machined Matte-Black Junction Box** (150 × 110 × 70 mm / 5.9" × 4.3" × 2.8"): Reinforced thermoplastic enclosure with stainless screws and silicone perimeter gasket. - **Positive-Pressure Venting Array**: 55 precision-drilled 3.5mm exhaust ports positioned to cool the VRM inductor and hashboard while shedding water spray. - **50mm High-Static-Pressure PWM Cooling Fan**: Continuous-duty fan bolted to the top intake bore. - **Stainless Steel Wire Finger Guard**: Circular wire grill with 4× M3 stainless socket cap screws and nyloc nuts. - **Liquid-Tight PG-13.5 Brass Cable Gland**: Nickel-plated brass compression gland with internal seal for weatherproof solar cable entry. - **14AWG Silicone Pigtail Leads**: High-strand orange and black silicone wire leads. - **Internal PCB Mounting Standoffs**: Pre-aligned standoffs and fasteners sized for Bitaxe mounting holes. - **SolAxe™ Equipment Nameplate Decal**: Brushed metallic chassis badge.